2018.12.04 15:07
LFA/LFA467/NETZSCH
조회 수 9407 추천 수 0 댓글 0
| Spec | Temperature range : -100℃ - 500 ℃ Diffusivity range : 0.01 – 1000 mm2/s Conductivity range : 0.1 – 2000 W/(m*K) Sample dimension : 6mm – 25.4mm Sample thickness : 0.01mm – 6mm Temperature range : -100℃ - 500 ℃ Diffusivity range : 0.01 – 1000 mm2/s Conductivity range : 0.1 – 2000 W/(m*K) Sample dimension : 6mm – 25.4mm Sample thickness : 0.01mm – 6mm |
|---|---|
| 규격 | ASTM E-1461, ASTM E 2585, DIN EN 821-2, DIN 30905, ISO 18775, ISO 13826 |
투자율측정기/E4991A/Agilent
-
LFA/LFA467/NETZSCH
Date : 2018.12.04Spec : Temperature range : -100℃ - 500 ℃
Diffusivity range : 0.01 – 1000 mm2/s
Conductivity range : 0.1 – 2000 W/(m*K)
Sample dimension : 6mm – 25.4mm
Sample thickness : 0.01mm – 6mm
Temperature range : -100℃ - 500 ℃
Diffusivity range : 0.01 – 1000 mm2/s
Conductivity range : 0.1 – 2000 W/(m*K)
Sample dimension : 6mm – 25.4mm
Sample thickness : 0.01mm – 6mm규격 : ASTM E-1461, ASTM E 2585, DIN EN 821-2, DIN 30905, ISO 18775, ISO 13826 -
투자율측정기/E4991A/Agilent
Date : 2018.12.04Spec : 130 mΩ to 20 kΩ.
Frequency= 1 MHz,
Point averaging factor ≥ 8,
Oscillator level= –3 dBm; = –13 dBm; or = –23 dBm,
Measurement accuracy ≤ ±10%,
Calibration is performed within 23 °C ±5 °C,
Measurement is performed within ±5 °C of calibration temperature -
주사전자현미경/CX-200TA/COXEM
Date : 2018.11.26Spec : Magnification : 15x ~ 300,000x
Accelerating Voltage : 1KV ~ 30KV
Sample Size : 65mm(H), 130mm(Diameter) -
거칠기측정기/PS10/Mahr
Date : 2018.11.26Spec : Tracing Speed : 1.0 mm/s, 0.5 mm/s
Profile 분해능 : 8nm
Cut Off : 0.25 / 0.8 / 2.5 mm
Tracing Length : 1.5/ 4.8 / 15 mm
Evaluation Length : 1.25 / 4 / 12.5 mm -
열화상카메라/E60/FLIR
Date : 2018.11.26Spec : IR resolution : 320 * 240 pixel
Temperature range : -20 ~ +650°C
Frame rate : 60Hz -
고온고압반응기/4848/Parr
Date : 2018.10.30Spec : Size : 1000 mL
Gasket : PTFE flat
Maximum Pressure : 1900 psi (131 bar) -
-
저온반응기/PSL-1400/EYELA
Date : 2018.10.30Spec : temp range:-40~0℃
rpm range:100~800rpm
Bath 용량:2.1L
사용용기 최대용량:300ml -
염수분무시험기/주문 제작
Date : 2018.10.30 -
압착장치/KP-M2290-2/국내제조사
Date : 2018.10.30Spec : Roller loads : 2Kg
Speed : 5~50mm/sec규격 : KS A 1107, KS T 1028 -
Ball Tack 시험기/KP-M2300/국내제조사
Date : 2018.10.30Spec : Inclined angle : 20°, 30°, 40°
Running distance : 100mm규격 : KS A 1107 -
열프레스기/KP-M2000-30/국내제조사
Date : 2018.10.30Spec : Temperature Range : RT~300℃
Common Pressure : 150Kg/cm2 -
저항측정기/3540/HIOKI
Date : 2018.10.30Spec : 측정 레인지 : 30mΩ/300mΩ/3Ω/30Ω/300Ω/3kΩ/30kΩ
최소 분해가능 : 10µΩ규격 : MIL DTL 83528C -
유지력시험기/ KP-M2606/국내제조사
Date : 2018.10.30Spec : Temperature : Max. 200℃( Available : Max. 180℃)규격 : KS T 1028 -
고온기/OF-22GW/국내제조사
Date : 2018.10.30Spec : Temperature Range (℃) :주변온도+10 to 250
Fluctuation at 100℃ (±℃): 0.8
Variation at 100℃ (±℃): 1.7
Heating time to 100℃ (min.): 6
Recovery time at 100℃ (min.): 1규격 : KS T 1028 -
-
고온점착력시험기/점착력 측정기(GNU-100)/고온기(MCO-W600)/국내제조사
Date : 2018.10.30Spec : 인장압축 시험기
Test Speed: 1~500mm/min.
분해능 : 1/100,000
고온기 150℃
1000N규격 : KS T 1028 -
만능재료시험기/LS1SC/AMETEK
Date : 2018.10.30Spec : Force Capacity 1000 N (225 lbf)
Max. Crosshead Travel, Standard Travel (Between the Eye Ends) 500 mm (19.7 in)
Max. Crosshead Travel, Extended Travel (Between the Eye Ends) 800 mm (31.5 in)
Crosshead Speed Range 0.01-2032 mm/min (0.0004-80 in/min)
Max. Return Speed 2032 mm/min (80 in/min)
Speed Accuracy (Unloaded) +/-0.2% of selected speed from 2% to 100% of max. speed규격 : KS T 1028 -
밀도측정기/MSA2245-100-DU/SATORIUS
Date : 2018.10.30Spec : Weighing capacity:220g
readability:0.1mg
repeatability:7E-05g
linearity:0.0002g규격 : ASTM B962 -
Paste Mixer/PM-500D/SUFLUX
Date : 2018.10.30Spec : Centrifugal rotation speed : 200 to 1000RPM
용량 : 500ml 2Bottles (0 to 800g)
자전 RPM : Max 400 rpm
